How to Fix Common VCR Player Problems
With the wide opening on VCRs, dust and other debris is able to find its way into the player. This causes problems with the video playback and recording of the VCR, often resulting in scratched lines across the video and static audio. However, there are a few general ways available to correct this problem, all of which you are able to perform yourself.
Things You'll Need
- Compressed air
- Cleaning tape
Check the cable connection running from the VCR to your television set. If the cable is not completely hooked up into both devices, the audio and video signal is going to be dropped.
Eject any tape inside the VCR. You are unable to correct the problem when a tape is inside the player.
Spray a few shots of compressed air into the VCR. This removes any large pieces of dust and debris that might be stuck on the player's heads, causing the distortion in the picture.
Insert the cleaning tape into the VCR and press "Play." Allow the cleaning tape to play for a few minutes, then push "Stop" and "Eject." The cleaning tape cleans the entire inside track of the VCR, removing small pieces of dust still clinging to the VCR heads.