How to Pair a BlueAnt Supertooth

By Amy McClain

The BlueAnt S1 Supertooth is a portable Bluetooth receiver. Clip it on to your car visor and keep both hands on the wheel while you use your wireless phone. If you've just acquired a Supertooth device, you'll need to take a few moments to set it up before it is ready for use. Plug your S1 into the AC adapter and allow it to charge---this usually takes about three hours. Leave the headset off to begin the pairing process.

Step 1

Access your phone's Bluetooth settings and turn Bluetooth on. For most devices, the Bluetooth options can be found under "Tools" or "Settings" in the main menu.

Step 2

Press and hold the Supertooth's green "Multi-Function" button for approximately five seconds. Release the button when the indicator light flashes red and blue. The device is now in pairing mode.

Step 3

Select "Add New Device" or "Search For Device" from your phone's Bluetooth settings menu. Your phone will search for several seconds, then display a list of available devices.

Step 4

Select "BlueAnt S1" from the device list and press "OK." You will be prompted for a pass key. Enter "0000" using your phone's keypad to complete pairing.