How to Program a Sanyo Remote Controller

Sanyo has a universal remote control that can operate your TV, cable box and VCR. This one device replaces three remotes. It's large glow-in-the-dark buttons make it easy to operate in a dark room. Once it's programmed, all you have to do is press the proper function key ('VCR," "TV" or "Cable") to operate each device.

...
The Sanyo universal remote can control several electronics, including a TV and cable box.

Step

Turn on the device (VCR, TV or cable box) you want to program.

Step

Press and hold down the particular function-key button you want to program ("TV," "VCR" or "Cable Box").

Step

Enter the two-digit programming code for the model you are programming. For example, if you have a Phillips VCR, you will enter the two-digit code that corresponds to a Phillips VCR. You can find a list of codes in the User's Manual (See Reference). Once the code is entered, the mode key light will flash five times.

Step

Press the "Power" button to turn off the device. If it turns off, the programming was successful. If not, repeat the steps listed above to reprogram your Sanyo remote control.