How to Send a Wireless Cable Signal From TV to TV

If you have a cable connection in one room but do not have a cable connection in another room, you can connect one television to cable using a wireless connection. In order to perform this task, you need a wireless cable television extender. Once connected, the cable will go to both televisions. In addition, you can change the channel and view different channels on the televisions using a wireless cable television extender. The picture quality may decrease using wireless technology.

...
One cable connection is needed before sending channels to a wireless TV.

Step

Connect a coaxial cable into your wall's cable connection.

Step

Connect the other end of the coaxial cable into a cable splitter. Be sure to screw the cable into the "In" jack on the cable splitter.

Step

Connect another coaxial cable from one of the "Out" jacks on the cable splitter to the coaxial cable "In" jack on your television.

Step

Connect another coaxial cable from the other "Out" jack on the cable splitter to the cable television extender's signal sender.

Step

Connect the wireless cable television extender's receiver to the coaxial jack on the television you want to receive the wireless cable signal.

Step

Turn on both televisions and the wireless cable television extenders to check that they are working properly.