How to Set Up a Karaoke System

By Giselle Diamond

Karaoke is one of the most popular activities at get-togethers and parties today. However, setup often can be frustrating and confusing, but it doesn't have to be that way. Follow these simple steps to set up your own karaoke system.

Things You'll Need

  • Karaoke disk system2 speakersTVAmpMixer2 microphones (corded or wireless)Cables (these are included with the components)

Step 1

Run your cables from the karaoke system to the TV. These should come out of a "line out" from the karaoke system.

Step 2

Connect the output cables included with the disc system for audio into the back (or the side, if applicable) of the mixer. It's usually possible to connect these to auxiliary plugs or a mixer channel. Connecting these into the auxiliary plugs can lead to better control of volume levels.

Step 3

Run your microphone cords into the mixer, making sure the connections are snug. The plugs are placed in the front or side of the mixer to allow the singer to move around.

Step 4

Connect the mixer to the amp using the appropriate cord. This will be a mixer output to an amplifier input.

Step 5

Run the output cables of the amplifier to the speakers you'll be using.

Step 6

Plug in the power supply to your system. It is important to check that the system is hooked up correctly before powering up to avoid damaged equipment.

Tips & Warnings

  • For easier storage, you might want to invest in a digital or mp3 karaoke system. Songs can be stored on a hard drive and played from anywhere.Make sure your TV has a large enough display so the lyrics can be easily viewed by the singer.
  • All cables and cords can be trip hazards. Always secure all cords and cables to the equipment or floor to reduce the risk of injury from a fall.As with any electrical system, the hazard of electric shock is present. Always make sure cables and cords are in good shape before setting up.

References & Resources