Installation Directions for a DiVinci Home Theater System

By Allen Coleman

There are several different DiVinci home theater systems available, and they all have the same setup. DiVinci home theater systems consist of a center channel, two front speakers, two rear speakers and a subwoofer. The subwoofer has all the inputs and outputs to connect the other five speakers and any other source, such as a television, to the system. Place all the speakers where you want them in the room, with the subwoofer placed near the television, and prepare to install your DiVinci home theater system.

Things You'll Need

  • RCA audio cable

Step 1

Insert the plug on the end of the speaker wire coming from the center channel into the output marked Center at the back of the subwoofer.

Step 2

Insert the plug on the end of the speaker wire coming from the front right speaker into the output marked Right Front on the back of the subwoofer. The right front speaker is the speaker on the right side as you look at the television or the front of the room.

Step 3

Insert the plug on the end of the speaker wire coming from the front left speaker into the output marked Left Front on the subwoofer.

Step 4

Insert the plug on the end of the speaker wire coming from the rear right speaker and plug it into the output marked Right Rear at the back of the subwoofer.

Step 5

Insert the plug on the end of the speaker wire coming from the rear left speaker and plug it into the output marked Left Rear at the back of the subwoofer.

Step 6

Insert the red and white plugs on an RCA cable into the television's audio output. The red plug is for the right channel and the white plug is for the left channel.

Step 7

Insert the other end of the RCA cable into the Audio In on the back of the DiVinci audio subwoofer. Repeat the process to connect any other sources, such as a cable box, to the DiVinci subwoofer.

Step 8

Plug the power cable coming from the subwoofer into a wall outlet.

References & Resources