How to Clean a CD Player Lens
In many cases skipping CDs are often due to either a defective or dirty disc. However, if your CD player is skipping or refusing to play clean and unscratched discs, the lens of the CD player is most likely dirty. The best way to completely clean the lens is to remove the CD player cover and clean it by hand.
Things You'll Need
- Cotton swabs
- Isopropyl alcohol
- Philips head screwdriver
Unplug the CD player from the wall outlet.
Remove the top from the CD player. This will involve locating and removing four to six Phillips head screws using an appropriately sized Phillips head screwdriver. After the top has been removed set it aside and place the screws inside the overturned top for safe keeping.
Locate the CD head/lens unit inside the player. It will be a dark plastic box with a bluish glass lens. The lens is the area that needs to be cleaned.
Dab a cotton swab in isopropyl alcohol and gently swirl the swab across the blue glass lens. Use another dry cotton swab to gently wipe across the lens and remove any excess moisture.
Replace the CD player cover by realigning it onto the CD player and tightening the Phillips head screws back into position.
Plug the CD player back into the wall outlet, power it on, and play a CD. The disk should now play skip free.
Tips & Warnings
- The CD player's lens is very sensitive. Use either isopropyl alcohol or a commercially purchased lens cleaning solution only.
- Never use paper towel to clean the lens, as the fibers are generally abrasive and can scratch the delicate surface.